The Wavlink login window is easy to open in computer or any internet devices, but it should be connected to the Wavlink network. Here, you will get to know about the Wavlink setup with login process one by one with different methods.
How to Set Up Wavlink Router?
Place router near to the modem and connect them both with an Ethernet cable. Then, you can turn up the devices and start configuring through the computer.
Configure with GUI
Way to reach the interface in computer is via Wavlink default IP address or URL, which is 192.168.10.1 or ap.setup.
- Link computer to the extender network. Go into the updated browser and search the IP 192.168.10.1 or the URL ap.setup.
- You will reach to the login page, where admin credentials needed to go further. Enter the admin username and password, click on the LOGIN button and you will get the access to interface.
Configure with Wavlink App
The Wavlink app is available on the Play Store or App Store in your phone. You must download it first like all other apps in your device. Then access the app through the admin username and password.
These details are given in the user manual of the extender device. Within the app dashboard, you can set up the settings according to your will and area of the house.
How to Connect Wavlink Extender with Router?
The extender is simple to connect with the router. The method name is WPS (Wi-Fi protected setup). Follow some instructions:
- Connect the extender and router to power and turn on the devices. Find and press the extender WPS button and press the same button on the router.
- Wait for a few seconds and devices will connect with each other automatically. Then the extender will set as default, you can also change the device settings.
Configure with GUI
The method to reach the interface in computer is via Wavlink default IP address or URL, which is 192.168.10.1 or ap.setup.
- Link computer to the extender network. Go into the updated browser and search the IP 192.168.10.1 or the URL ap.setup.
- You will reach to the login page, where admin credentials needed to go further. Enter the admin username and password, click on the LOGIN button and you will get the access to interface.
Configure with Wavlink App
The Wavlink app is available on the Play Store or App Store in your phone. You must download it first like all other apps in your device. Then access the app through the admin username and password.
These details are given in the user manual of the extender device. Within the app dashboard, you can set up the settings according to your will and area of the house.
Tips and Solutions
Restart Network
Both the router and extender can be rebooted via just turn off and turn on. The first way to reboot the device is pressing the power button on the devices for two times. The second way to restart the unit is unplugging it from the socket and plugging it again in the wall socket.
Reset Router/Extender
With this mentioned procedure all data will disappear and adjusted settings will be deleted. There are easy steps to initiate the WiFi reset process.
- Find the RESET process on the side of the device.
- Press the button and hold it for 10 seconds.
- By releasing it the reset process will starts.
You can also apply these tips and trick on your new Wavlink AC1200 setup at home.
End Words
In this article post, we have concluded all steps and methods to setup the Wavlink router and extender in your home.
Leave a Comment